MVI is a wide-angle flood fan ceramic spray nozzle with a wide pattern using Venturi air induction technology to increase droplet size reducing drift potential and performing in distribution uniformity. Designed to resist clog, easy to dismantle and clean, the ceramic orifice and deflector make the MVI the longest-wearing and revolutionary flood tip.

Tabulation Charts & Features

Applications

All types of treatments, systemic and contact products, including liquid fertilizers.

Features

• Type : Air induction flood tip – Flat fan jet – Big droplets with uniform distribution
• Pressure : 20 psi / 1,5 bar > 60 psi / 4 bar
• Spray angle : 130° > 160°
• Drift hazard : Very Low
• Droplet size :  Very Coarse

Specific features

• Accurate and uniform distribution for large flow rates, flat fan pattern angle 130° > 160°.
• Wear resistant ceramic ALBUZ®  orifice and deflector in a high resistance plastic body: excellent long lasting precision and high wear resistance to all types of chemicals including acids. Ceramic inserts outwear stainless steel nozzles by up to 10 times.
• Air induction spray nozzle (Venturi aspiration system): sprays large drops filled with air bubbles which do not drift and burst into fine droplets on contact with the target.
• Extremely low drift potential and loss reducing effect while increasing the number of impacts: excellent coverage of the treated zone.
• Large orifice designed to minimize clogging – double air-intake orifice.
• Easy to dismantle and clean.
• Full range with 10 models ISO flow rated and ISO color coded,
• High resistance plastic body is specific and not ISO:  0.43’’ / 11mm  between flat surfaces.
• Automatic spray alignment with cap and gasket ref : 039351
• Designed for all types of nozzles-holders, using the same cap as APM nozzles.
• Optimum pressure:  20 psi / 1,5 bar.

Buy it now !