CVI 110° : Drift control air induction flat fan ceramic spray nozzle
CVI is a wide angle flat fan ceramic spray nozzle with Venturi air induction technology to offer extremely low drift potential and loss-reducing effect at low pressure. Very compact design to fit all type of nozzle holders. Valuable alternative to conventional standard type nozzles. Ceramic provides excellent chemical resistance, including acids, as well as exceptional wear resistance and long lasting precision. Non-clogging design with double air intake orifice.
| Tabulation Charts & Features |
Applications
- For all types of treatments : herbicides, fungicides, insecticides, growth regulators and liquid fertilizers.
| Herbicides | Fungicides | Insecticides | Liquid fertilizer | |||||
| Contact | Systemic | Soil Incorporated | Pre-emergence | Contact | Systemic | Contact | Systemic | |
| Good | Excellent | Excellent | Excellent | Good | Excellent | Good | Excellent | Excellent |
Features
- Type : Air induction flat nozzle
- Pressure : 20 psi / 1,5 bar > 40 psi / 3 bar
- Spray angle : 110°
- Drift hazard : Very Low
- Droplet size : Coarse
- Crossed TeeJet reference : AIXR TeeJet® Air Induction XR flat spray tips
Specific features
- Pink ALBUZ® ceramic insert : excellent long lasting precision and high wear resistance to all types of chemicals including acids. Ceramic inserts outwear stainless steel nozzles by up to 10 times.
- Wide flat fan pattern angle 110°: spray overlap ensures uniform distribution on the ground.
- Flow rate specifications, body size and color meet international ISO standards. This ensures that it is easy to fit ISO nozzles on all sprayer brands.
- Designed for all types of nozzle holders, using the same cap as ISO nozzles (for example: AXI).
- Air induction spray nozzle (Venturi aspiration system): sprays large drops filled with air bubbles which do not drift and burst into fine droplets on contact with the plant.
- Extremely low drift potential and loss reducing effect while increasing the number of impacts: excellent coverage of the treated zone.
- Very compact design (0;86” / 22mm length) for all types of nozzle-holders, and helps preventing tip damage.
- Non clogging design and double air-intake orifice.
- Automatic spray alignment with Cap ISO – code : 039535
- Optimum spray height : 20″ / 50cm with 20″ / 50cm nozzle spacing.
- Optimum pressure : 30 psi / 2 bar
| Spray angle 110° | Nozzle spacing : 20″ / 50cm |
| Mini mum height |
15″ / 40 cm |
| Double overlapping |
13″ / 35 cm |
| Triple overlapping |
27″ / 70 cm |
| Maximum height |
30″ / 80 cm |
| Buy now ! |

